Rockwell Automation 2711 PanelView 550/900 Profibus Communications User Guide - Manual (Page 31)

PROFIBUS DP Communications 31
Publication 2711-6.3
Active Address
displays the current network operating address of the PanelView.
This address is originally set in the PanelView application file but
may be changed by an operator.
Baud Rate
displays the current PROFIBUS DP network baud rate set by the DP
Master. The network baud rate is automatically determined by the
PanelView terminal.
Firmware Revision:
shows the PROFIBUS DP firmware revision level.
Communications Status Field:
displays the PanelView terminal’s PROFIBUS DP communication
status. This is the same message or error number displayed on the
alert banner.