Rockwell Automation 2711 PanelView 550/900 Profibus Communications User Guide - Manual (Page 7)

PROFIBUS DP Communications 7
Publication 2711-6.3
Connecting the Type A Cable
The following diagram shows how the Type A cable connects to the
PanelView.
Pin #1
Pin #3
Receive/Transmit +
Pin #8
Receive/Transmit –
Pin #5
Data Ground
Pin #6
+5 V
Receive/Transmit +
Receive/Transmit –
PanelView
PROFIBUS DP Connector
PROFIBUS DP Cable
Connector
PROFIBUS Cable
5 1
9 6
Cable Connector
1 5
6 9
PanelView Connector
Pin #1
! No Connection
Pin #3
! Receive / Transmit Data Positive
Pin #8 ! Receive / Transmit Data Negative
Pin #5 ! Data Ground
Pin #6 ! +5V
0.01
mF
1M
W
Internal Circuit
Note: Connect the cable shield to the metal shroud of the connector.
The PanelView connector shell is connected to the chassis ground.