Rockwell Automation 2711 PanelView 550/900 Profibus Communications User Guide - Manual (Page 39)

PROFIBUS DP Communications 39
Publication 2711-6.3
The following specifications apply to the PanelView terminal on a
PROFIBUS DP network:
General Specifications
Item
Specification
Communication Standard
PROFIBUS – DIN 19245 Part 1, Issue 1991 and
Draft DIN 19245 Part 3, Issue 1993
PROFIBUS DP Supported Baud
Rates
9.6, 19.2, 93.75, 187.5, 500k bits/s and 1.5M bits/s
PROFIBUS DP Identification
Number
6714 (Hex)
Station Delay Response Times (Tsdr)
Baud Rate
Minimum
T
sdr
Maximum
T
sdr
9.6k bit/s, 19.2k bit/s, 93.7k bit/s, 187.5k bit/s 11 bit times 60 bit times
500k bit/s 11 bit times 100 bit times
1.5M bit/s 11 bit times 150 bit times
Supported DP Data Sizes
Data Type
Maximum
Data Size (bytes)
Input Data 64
Output Data 64
Extended Diagnostic Data 14
User Operational Parameters Not Used
Maximum Number of Modules 4
Maximum Required Consistency 32
Supported DP Features
Feature
Supported/Not Supported
Freeze Mode Not Supported
Sync. Mode Not Supported
Auto Baud Supported
Set Slave Address Not Supported
PROFIBUS DP Network
Specifications