Rockwell Automation 6189 Accessory Mounting Brackets and Covers for 6180 Computers - Manual (Page 13)

Accessory Mounting Brackets and Covers 13
4. Install the IDE converter board (provided with bracket) on the
two standoffs on the left side of the drive bays. The converter
board snaps on to the standoffs, no hardware is required.
IDE Converter Board
5. Connect the shorter processor board IDE cable (provided with
bracket) and power connector to the IDE converter board.
IDE Cable From Processor
Board Connects Here
IDE Converter Board
Drive Cable (provided with
bracket) Connects Here
Power Supply Cable for
Drive Connects Here.