Rockwell Automation 6189 Accessory Mounting Brackets and Covers for 6180 Computers - Manual (Page 9)

Accessory Mounting Brackets and Covers 9
2. Position the front cover inside the front bezel assembly and
secure with the screw provided. Tighten screw to a torque of 6-8
in. lbs (.7-.9 N
Sm).
Install Screw to Secure Cover
Install Front Cover from the Inside
Make sure bottom edge of cover fits
between edge of chassis and the two tabs.
Tab
Edge of Chassis
3. Swing the chassis back onto the bezel and secure chassis with the
three latching screws. Tighten screws to a torque of 18-22 inch
lbs (2-2.5 N
Sm).