Rockwell Automation 6189 Accessory Mounting Brackets and Covers for 6180 Computers - Manual (Page 8)

Accessory Mounting Brackets and Covers 8
To install a front cover:
!
ATTENTION: If the 6180 Computer is installed with
mounting clips, the mounting clips on the hinge side
will interfere with the opening of the hinge. Remove
the mounting clips on the hinge side before swinging
chassis away from the bezel. Failure to remove clips
may damage clips and the chassis.
!
ATTENTION: Remove all cables from the the side
panel connectors. Failure to remove cables may cause
damage to the cables and connectors.
1. Swing open the back of the computer chassis after removing the
three bezel latching screws. Refer to 6180 computer user manual
for instructions if required.
Chassis Swings Away
From Bezel
Front Bezel
Latching Screws (3)