Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 11)

1–6 Variable Content TTL:Chap Is Linked To HD:Running
Publication 2755-6.14
Exit Program Mode
Press 6 to activate this option or move the cursor to this location and
hit ENTER . This option causes the reader to exit programming mode.
Three beeps from the reader indicates a successful exit from Program
Mode. Note that if you program the reader from the Configuration
screen, the program exits Program Mode if you press F5. Once you
exit Program Mode, you are then able to resume normal scanning.
Software Compatibility
Press 7 to activate this option, or move the cursor to this location and
hit ENTER . This option returns the firmware version installed in the
reader and specifies if it is compatible with existing StrataScan
software. Hitting any key returns you to the current screen. To
perform this test, it is not necessary to enter Program Mode first.
Exit to DOS
Press 8 to activate this option, or move the cursor to this location and
press ENTER . This option closes the program and returns you to the
DOS prompt or Windows.