Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 21)

2–10 Configuring your Reader
Publication 2755-6.14
Miscellaneous Type Description
Special code select
When this option is enabled and the Enter key is hit
on this choice, a custom reader parameters window
appears. This window allows you to select up to 5
code and length–specific code selects. The reader
only scans those codes at the programmed lengths
entered here. When used in conjunction with
Package Detect and multiple scans per activation, the
reader scans and buffers the programmed bar codes.
It transmits them in the order that they were
programmed within the window. See Package Detect
and Multiple Scans per activation for more details.
Use the arrow keys to move around the screen. Use
the Enter key to save the current code select choice
and advance to the next choice. Use the backspace
key to go back to the previous choice. Hit
F10 to
save these settings and return to the configuration
screen or hit
Escape to exit without saving changes.
Normal/Loud Volume Select the desired loudness with these 2 options.
Support ‘M/O’ motor on/off
commands
When this option is enabled, the reader accepts ‘ M’
motor on and ‘ O’ motor off commands from the host.
The motor off command causes the lasers to go off,
the motor to shut down, and the power LED to go off.
A motor on condition turns the motor back on and the
power LED to come on. The lasers do not turn on
until the motor comes up to full speed (approx. 45-50
seconds).
Support non–decode hand–held
port
This option enables the reader to support an
undecoded hand–held reader connnected the
hand–held port. When this option is enabled, the HH
(Hand– Held reader option) window at the bottom of
the configuration screen displays all currently
supported Hand–Held options.