Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 26)

2–15 Configuring your Reader
Publication 2755-6.14
Output/Package Detect Type Description
Buffer scans until package
detect cycle completes
StrataScan Readers have the ability to buffer all bar
codes as they are scanned (with Package Detect
support enabled). If this option is enabled, all
scanned bar codes are buffered during the active
sensor cycle and are not transmitted, until the
activation cycle has completed. This feature is
supported with all 3 Package Detect mode options. If
this feature is not enabled, all scanned bar codes are
transmitted as they are scanned. This option does not
apply to the special code select feature, which always
buffers incoming bar codes.
Enable host package detect
emulation
When this option is enabled, the host simulates the
Package Detect input(s) by sending an ‘ S’ (53h)
character and an ‘ X’ (58h) character. If dual Package
Detects is enabled, the ‘ S’ simulates the Package
Detect input 1 and the the ‘ X’ simulates the Package
Detect input 2. If a finite scan duration is being used,
the ‘ S’ character starts the cycle. If scan duration > 9
seconds (reader active until the sensor goes away),
the ‘ S’ starts the cycle and the ‘ X’ ends the cycle.
Scan Range
This section provides depth of field options. Long depth of field
should be enabled in all StrataScan Readers. The 2 reserved options
are not currently supported and are reserved for future use.