Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 8)

1–3 Variable Content TTL:Chap Is Linked To HD:Running
Publication 2755-6.14
The following keys perform a given function as described below.
Function Key Description
ENTER
To display a list of options for a given vertical field
within the Configuration Screen or to select a Main
Menu screen choice, position the cursor on the
desired field and press
ENTER . ENTER will also
allow you exit from a pop-up window menu.
SPACE BAR
Within the pop-up window menus, an option may
have a left and right bracket before the menu
choice. These options can either be enabled or
disabled. To enable or disable an option, position
the cursor on the menu choice and press the
SPACE BAR key. When a check mark is within
the brackets, the option is enabled.
ESC Exit
Escape will also allow you to escape out of most
situations.
F1 Help
For a brief description of the function of a vertical
menu, position the cursor on the desired field and
press
F1 . To exit help, press ESC .
F3 Enter Program Mode or Create
Choice File
If you are within the Configuration Screen, hitting
F3 puts the reader into Program Mode.
If you are at the Main Menu screen, F3 allows you
to generate a text file, listing all options a particular
configuration file has enabled. For example, if you
want a listing of all the enabled settings your reader
has, refer to Program Mode, Getting Scanner
Settings and Saving Settings to File. Select the
filename from the file list, hit
F3 and a file listing all
enabled choices within that file is created in your
working directory. This file will share the same
filename, except that it will have a .set extension.
F5 Program Scanner
After the desired parameters are selected in the
Configuration Screen, press
F5 to program the
reader to those same settings. (This assumes you
have already entered Program Mode successfully.)
F7 Save Parameters
To save the various parameters selected in the
Configuration Screen, press
F7 . The settings are
then saved in a file for future reference and
programming. When assigning a filename, use the
proper DOS convention. StrataSet automatically
saves the file with the extension .TRK. The file is
saved to the same drive and directory from which
StrataSet is being run.
F9 Return to Main Menu or Delete
File
If you select File List from the Main Menu, you are
able to delete files by hitting
F9 . You will be
prompted to verify your selection ( ESC terminates
the process). If you are within the Configuration
Screen, pressing
F9 returns you to the Main Menu.
Keyboard Commands