Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 17)

2–6 Configuring your Reader
Publication 2755-6.14
Supplemental Type Description
2 Digit
When this option is enabled, the reader scans bar
codes that have 2-digit supplementals.
5 Digit
When this option is enabled, the reader scans bar
codes that have 5-digit supplementals.
977 (2–Digit)
When this option is enabled, the reader requires that
a 2-digit supplement be attached to an EAN-13 bar
code whenever the bar code begins with 977.
Bookland
When this option is enabled, the reader requires that
a 5-digit supplement be attached to an EAN-13 bar
code, whenever the bar code begins with 978.
Redundancy 2 Digits
When this option is enabled, the reader scans the bar
code plus the 2-digit add-on twice, before accepting
the data as valid information.
Redundancy 5 Digits
When this option is enabled, the reader scans the bar
code plus the 5-digit add-on twice, before accepting
the data as valid information.
Require Supps
When this option is enabled, all UPC/EAN labels that
are scanned must have a supplement.
100 ms to find Supps
When this option is enabled, the reader looks for a
supplement attached to a bar code, for a maximum of
100 msec.
200 ms to find Supps
When this option is enabled, the reader looks for a
supplement attached to a bar code, for a maximum of
200 msec.
Code 128 Coupon Option
When this option is enabled, the reader scans UPC-A,
followed by a Code 128 supplement attached.
Code 128 Coupon Conversion
When this option is enabled and when Code 128
coupon option is enabled, a ]C1 is transmitted
between the UPC-A bar code and Code 128
supplement.
378/379 lock on supplement
When this option is enabled, all EAN-13 labels are
expected to have a 5-digit supplement attached, when
the bar code begins with a 378 or 379.
Remote supplement required
When this option is enabled, the host can enable/
disable supplements required, with an ‘R’ (disable
requirement) and an ‘N’ (enable requirement).