Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 15)

2–4 Configuring your Reader
Publication 2755-6.14
Code Types
This portion of the Configuration Screen lets you specify the various
bar code types to enable or disable for your application.
Within the Codes Menu Screen, you may enable or disable the codes
you want your reader to see or ignore. If a code is enabled, a check
mark appears between the two brackets. Then the reader recognizes
the enabled type of bar code. The types of codes are:
•
All UPC/EAN
•
Code 39
•
Full ASCII Code 39
•
Code 39 Mod 43 check digit required
•
Code 93
•
Code 128
•
Codabar
•
I2 of 5
•
I2 of 5 Mod 10 check digit required
•
EAN-8 disable, EAN-13 disable, UPC-E disable, UPC-A disable
•
Paraf