Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 13)

2–2 Configuring your Reader
Publication 2755-6.14
Refer to the following steps to configure the StrataScan Bar Code
Readers (Catalog Nos. 2755-LHR-5B, 2755-LHR-3C, 2755-LHR-5C
and 2755-LHR-5BX1).
1. Verify that your personal computer has the STRATCFG
Programming Software version 4.19 or later loaded onto it.
2. Double–click on the STRATCFG icon or execute the file.
3. Select the Configuration screen from the Main Menu.
4. Review your programming options. If the defaults are acceptable
for your application, press F3 . If the defaults are not acceptable,
change the parameters accordingly.
5. Press ENTER once the settings are correct. The reader is now in
Program Mode. The green LED on the reader flashes while the
red LED remains lit. A beep is emitted from the reader as well.
6. Press F9 to exit Program Mode. Use the down arrow key to select
Exit Mode.
7. Press ENTER . The green LED stops flashing and the laser turns on.
8. Exit StrataSet software. The reader is now configured to read bar
codes.
Configuring the Reader Configuring the Reader