Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 38)

2–27 Configuring your Reader
Publication 2755-6.14
Non-UPC Formatting Types
Non-UPC Formatting Type Description
CLSI Editing
When this option is enabled, the reader performs
CLSI library type editing before the information is
transmitted to the host. This editing only works with
14–digit Codabar type labels.
Transmit Codabar Start/Stop
Characters
When this option is enabled, the reader transmits
Codabar’s start and stop characters before and after
each bar code. This menu choice works in
conjunction with the Codabar option in the Codes
section. Both must be enabled for this feature to
work.
Transmit Code 39 Start/Stop
Characters
When this option is enabled, the reader transmits
Code 39’s start and stop character. This menu choice
works in conjunction with the Code 39 option in the
Codes section. Both must be enabled for this feature
to work.
Transmit I2 of 5 Mod 10 check
digit
When this option is enabled, the reader transmits the
Interleaved 2 of 5 (I2OF5) Mod 10 check character.
This menu choice works in conjunction with the I2OF5
Mod 10 option in the Codes section. Both must be
enabled for this feature to work.
Transmit Code 39 Mod 43 check
digit
When this option is enabled, the reader transmits
Code 39’s Mod 43 check character. This menu choice
works in conjunction with the Code 39 Mod 43 option
in the Codes section. Both must be enabled for this
feature to work.