Rockwell Automation 2711E-NKSW1 Replacement Keyswitch Assembly User Manual
Rockwell Automation Equipment
1
40061-135-01(C)
Installation Instructions
Replacement Keyswitch Assembly
(Catalog No. 2711E-NKSW1)
Applicable Terminals
Use this replacement keyswitch with PanelView Terminals 2711-KA1,
-KC1, -TA1, -TC1, -TA4, -TC4 and PanelView 1400e Terminals Series E
and earlier)
Contents
This document contains instructions for multiple terminals. Refer to
the section that applies to your terminal.
Tools Required
Tools Required:
•
flat-blade screwdriver
•
phillips screwdriver
•
7/8 inch. open-ended wrench
•
needle nose pliers
Section
Page
Tools Required
1
Important
2
PanelView 1200 Terminals Series A through Series C
3
PanelView 1200 Terminals Series D and Series E
9
PanelView 1200 Series F through Series G, all PanelView 1200e
14
PanelView 1400e Series A through Series E
18
Troubleshooting- All Terminals
21