Pv 1200 series d and series e (continued), Disconnect the logic board – Rockwell Automation 2711E-NKSW1 Replacement Keyswitch Assembly User Manual
Page 10
Advertising
![background image](/manuals/580544/10/background.png)
40061-135-01(C)
10 Replacement Keyswitch Assembly
PV 1200 Series D and
Series E (Continued)
Disconnect the Logic Board
Remove the connections from points J3, J4, J5, J6, J7, J8 and J9 on the
logic board.
J3
J5
J7
J9
J4
J6
J8
Squeeze the clips and
slide them out to loosen
the connector, then pull
out the ribbon cable.
Advertising