Rockwell Automation 2711E-NKSW1 Replacement Keyswitch Assembly User Manual
Page 2
40061-135-01(C)
2 Replacement Keyswitch Assembly
Important
Replacement of the Keyswitch Assembly should be performed by a
qualified technician who has experience in the service and repair of
electronic equipment. In no event will Allen-Bradley LLC be
responsible for indirect or consequential damages resulting from the
replacement of this part.
Use an anti-static mat or wear a grounding wrist strap whenever you
work with any electronic components.
Back Up Your Application File
If you have no disk copy of the application file (as it was created in
PanelBuilder) make one before opening the terminal. Upload the
application file to a computer running PanelBuilder 1400e and save
the file on disk.
ATTENTION
!
Make sure that the PanelView terminal’s power cord
is disconnected, and that all cables have been
disconnected from the rear of the terminal.
ATTENTION
!
The electronic components in PanelView terminals
are extremely sensitive to static electricity and may
be permanently damaged by electrostatic discharges.
Follow proper handling procedures for electrostatic
devices.