Rockwell Automation 2711E-NKSW1 Replacement Keyswitch Assembly - Manual (Page 11)

40061-135-01(C)
Replacement Keyswitch Assembly 11
Remove the Logic Board Drawer
The drawer hinges are white nylon bushings held in place by a
phillips screw.
1. Remove the screw from the top hinge (the one opposite the side
with the ground wire). Using needle nose pliers, pinch the
prongs on the bushing and push the bushing upwards, out of
the metal tab.
2. Swing the drawer outwards, and the other bushing will detach,
allowing the drawer to be removed. The ground wire can
remain attached.