Panelview 1400e series a through series e, Open the logic board drawer, Disconnect the logic board – Rockwell Automation 2711E-NKSW1 Replacement Keyswitch Assembly User Manual
Page 18
Advertising
40061-135-01(C)
18 Replacement Keyswitch Assembly
PanelView 1400e Series A
through Series E
Open the Logic Board Drawer
1. Place the terminal on its side on top of a protective surface.
2. Remove the two screws which hold the logic board drawer
closed.
3. Swing the drawer open.
Disconnect the Logic Board
Remove the connections from points J1, J5, J6 and P3 on the logic
board.
PanelView 1400e Terminals
Keyswitch
Remove these
screws to access
the logic board.
P3
J6
J1
J5
Advertising