Rockwell Automation 7703E Medium Voltage SMC OEM Components - 10-15 kV - Manual (Page 31)

Rockwell Automation Publication 7703E-IN001E-EN-P - July 2014 31
Control Component Installation Chapter 4
Control Wiring
Table 6 provides the control terminal wire capacity and the tightening torque
requirements. Each control terminal will accept a maximum of two wires.
Table 6 - Control Wiring and Tightening Torque
Control Terminal
Designations As shown in Figure 15 , the SMC Flex controller contains 24 control terminals on
the front of the controller.
Figure 15 - SMC Flex Controller Control Terminals
Wire Size Torque
0.75…2.5 mm
2
(#18…#14 AWG) 0.6 N•m (5 lb•in.)