Rockwell Automation 7703E Medium Voltage SMC OEM Components - 10-15 kV - Manual (Page 37)

Rockwell Automation Publication 7703E-IN001E-EN-P - July 2014 37
Chapter
6
Typical Wiring Diagrams
Wiring Diagrams The following wiring diagrams illustrate the connections between the main
components of the MV SMC OEM components.
Additional components are typically required to complete the MV SMC. Refer
to
Appendix B for examples of how these additional components can be
implemented to form a complete solution.
ATTENTION: Wires used for connecting the components must be sufficiently
insulated to withstand system voltage. Refer to the appropriate wiring diagram
for the wire insulation requirements. Failure to use adequately insulated wiring
may cause injury to personnel and/or damage to the equipment.