B - typical schematic diagrams, Introduction, Appendix b – Rockwell Automation 7703E Medium Voltage SMC OEM Components - 10-15 kV User Manual
Page 49: Typical schematic diagrams, Appendix
Rockwell Automation Publication 7703E-IN001E-EN-P - July 2014
49
Appendix
B
Typical Schematic Diagrams
Introduction
This Appendix contains a typical schematic for a complete MV SMC Flex
controller (refer to
).
Refer to publication
for additional samples of control
wiring configurations. The examples shown are not a recommendation for the
correct wiring configurations, nor is the OEM required to follow this design
exactly.
The OEM must ensure that all wiring for the unit meets all performance and
safety requirements, including any applicable laws, regulations, codes and
standards.
Rockwell Automation does not assume any responsibility or liability for loss or
damages caused by failures in the unit manufactured by the OEM.
For more information, see the Warranty section in General Terms and
Conditions of Sale, Publication 6500-CO001_-EN-P.