External power supply, External power supply -6 – Rockwell Automation 4100 ESRS Encoder Signal Reference Simulator Installation Manual User Manual
Page 24
Advertising
![background image](/manuals/580767/24/background.png)
Publication 4100-IN505A-EN-P - October 2000
2-6 Installation
This diagram shows how to connect the ESRS to enable the device
from a source provided by your equipment and control the Enable
with volt free contacts.
Figure 2.5 ESRS Enabled via Volt Free Contacts – Power Supplied by Users
Equipment
External Power Supply
The following diagrams indicate how an external power supply
should be connected to the ESRS in cases where the encoder supply
in the target equipment has insufficient capacity to drive it. The
Advertising