Rockwell Automation 4100 ESRS Encoder Signal Reference Simulator Installation Manual - Manual (Page 7)

1 Publication 4100-IN505A-EN-P - October 2000
Preface
Read This Manual Read and understand this instruction manual. It provides the
necessary information to let you install, connect, and set up the
Encoder Signal Reference Simulator for safe, reliable operation. This
preface covers the following topics:
•
Who should use this manual
•
The purpose of this manual
•
Terminology
•
Common techniques used in this manual
•
Allen-Bradley support
Who Should Use this
Manual You should read this manual if you are responsible for the installation
or set up of the Encoder Signal Reference Simulator.
If you do not have a basic understanding of the products listed below,
contact your local Allen-Bradley representative for information on
available training courses before using this product.
•
S Class Compact motion controller
•
1394 GMC System module
Purpose of this Manual This manual is an installation and set up guide for the Encoder Signal
Reference Simulator. It describes the procedures necessary to properly
install and configure it into your motion control system.