Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual - Manual (Page 114)

114 Rockwell Automation Publication 9528-UM001C-EN-P - March 2014
Chapter 5 Configure Application Server Historian
Complete Historian
Configuration At this point, the FactoryTalk Historian virtual template is ready for use. Review
the Post Installation Tasks and Configuring FactoryTalk Historian chapters of
the FactoryTalk Historian SE Installation and Configuration Guide, Rockwell
Automation Publication HSE-IN025A
(see
http://literature.rockwellautomation.com/idc/groups/literature/
documents/in/hse-in025.pdf ), for a complete list of options related to
configuring FactoryTalk Historian, adding your Historian to the FactoryTalk
Directory, assigning license activations to the FactoryTalk Historian server,
configuration of data interfaces, security configuration, and other items to
consider to complete your AppServ-Hist installation.
The FactoryTalk Historian SE Installation and Configuration Guide can be
found in your template at: c:\AppServ-Hist Software Install Files\
4.00.00-FTHistorian-SE-DVD\Redist\Docs.
IMPORTANT We recommend that you perform the following sections of the FactoryTalk
Historian SE Installation and Configuration Guide, publication
HSE-IN025A, on
the pages indicated:
• Verify that Historian Services are Running (page 53)
• Verify that Historian Server is Updating Data for Default Tags (page 55)
• Create Security Mappings (page 71)
• Adding the Server to the FactoryTalk Directory Connection (page 78)
• Assigning License Activations to the Historian Server (page 88)