Define the factorytalk directory location – Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual User Manual
Page 98
98
Rockwell Automation Publication 9528-UM001C-EN-P - March 2014
Chapter 5
Configure Application Server Historian
Define the FactoryTalk
Directory Location
Complete the following steps to specify the Network FactoryTalk Directory
location for AppServ-Hist.
1.
Click Start and choose All Programs>Rockwell Software>
FactoryTalk Tools>Specify FactoryTalk Directory Location.
The FactoryTalk Directory Server Location Utility appears.
2.
Click Browse (ellipsis '…' in box).
3.
Type your FactoryTalk Directory Administration Console credentials into
the login screen and click OK.
4.
Click Remote computer.
Click Browse (ellipsis '…' in box) to navigate the network to find the
computer name of the PASS server that is hosting the FactoryTalk
Directory services.
5.
Choose the appropriate PASS server name and click OK.
The Network FactoryTalk Directory location has now been specified.
6.
When prompted, enter your credentials and click OK.
7.
Restart the server after making a change.