Configure ethernet network adapter settings – Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual User Manual
Page 43
Rockwell Automation Publication 9528-UM001C-EN-P - March 2014
43
Configure the Process Automation System Server (PASS)
Chapter 2
Configure Ethernet Network
Adapter Settings
Use the following procedure to set the speed, duplex, and power management
settings for the Ethernet adapter.
1.
Click Start and choose Control Panel.
2.
Click System & Security.
3.
Click Network & Internet.
4.
Click Network and Sharing Center.
The Network and Sharing Center dialog box appears.
5.
Click Change Adapter Settings.
6.
Right-click Local Area Connection and choose Properties.
The Network Properties dialog box appears.
7.
Click Configure.
8.
Click the Advanced tab.
9.
From the Property window, choose Link Speed & Duplex.
10.
From the Value menu, choose Auto Negotiation.
11.
Click the Power Management tab.
12.
Clear the ‘Allow the computer to turn off this device to save power’
checkbox.
13.
Click OK.