Open activation manager – Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual User Manual
Page 51
Advertising
Rockwell Automation Publication 9528-UM001C-EN-P - March 2014
51
Configure the Process Automation System Server (PASS)
Chapter 2
Open Activation Manager
On the Activation Manager computer, start the activation process by opening the
Activation Manager.
1.
Click Start and choose All Programs>Rockwell Software>
FactoryTalk Activation>FactoryTalk Activation Manager.
The FactoryTalk Activation Manager window appears.
2.
For instructions on installing FactoryTalk activations, click Help (circled
above).
3.
Use the Help instructions to complete the activations.
After completing the activation process, your PASS is ready to use.
Advertising
This manual is related to the following products: