Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual - Manual (Page 20)

20 Rockwell Automation Publication 9528-UM001C-EN-P - March 2014
Chapter 1 Configure the Virtual Image Templates
Create a Template on
Datacenter for Future
Deployments Now that you have deployed the OVF template from the USB drive, this section
shows how to create a template within the Datacenter for future deployments.
This new template is no longer in OVF format, but in a format used by VMware.
1. If the VMware vSphere Client is not already open, on a computer with
VMware vSphere Client software installed click Start and choose
All Programs>VMware>VMware vSphere Client.
The vSphere Client Window appears.
2. Right-click the template that you want to clone and select
Template>Clone to Template from the menus that appear.