Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual - Manual (Page 25)

Rockwell Automation Publication 9528-UM001C-EN-P - March 2014 25
Configure the Virtual Image Templates Chapter 1
Deploy Additional Virtual
Machines from Datacenter Now that we have templates on the Datacenter, additional deployments can be
performed from these new templates. We no longer require the USB drive or
VMware to convert from the OVF format.
This new template is no longer in OVF format, but in a format used by VMware.
1. If VMware vSphere Client is not already open; on a computer with
VMware vSphere Client software installed, click Start and choose
All Programs>VMware>VMware vSphere Client.
The vSphere Client Window appears.
2. Click Home.
3. Click the VMs and Templates icon.
4. Right-click a template and choose 'Deploy Virtual Machine from
this Template'.
The Deploy Template dialog box appears with the Name and
Location section.
5. In the Name box (circled above), type a name for your virtual machine.