Rockwell Automation Liqui-Flo Control Configuration Software Version 6.0, M/N 2CS3000 - Manual (Page 24)

2-10 Control and Configuration Software V6.1
2.6 Exiting the CS3000 Software
To exit the software, choose Exit from the File menu. Exit closes the CS3000 software.
If you modified the open configuration, you are prompted to save the changes to a
configuration file.
Access the PC Scope. Drive | PC Scope
Control the drive. Drive | Control
Display the drive’s fault and alarm
logs. Drive | Fault/alarm
Print a configuration file. File | Print
Access the on-line help Help | Contents
Table 2.2 – Toolbar Icons and Menus
To: Use this icon: Or this menu command: