Rockwell Automation Liqui-Flo Control Configuration Software Version 6.0, M/N 2CS3000 - Manual (Page 89)

Error Messages A-1
A
PPENDIX
A
Error Messages
General Error or Error <number> <description>
If you receive a numbered error, record the error number and any message that is
displayed, and call Reliance Electric for assistance.
Out of memory error. Close other applications to free memory.
This error is displayed if the software cannot allocate RAM. If it is displayed, you
should close other programs or add memory to the computer.
Out of Disk Space.
This error occurs if you attempt a print to file or save a configuration to a disk that has
insufficient space.
Missing or unreadable files. Reinstall CS3000.
At start-up or when a drive is selected, the CS3000 software reads information from
data files. This error is displayed if these files have been altered or are not located in
the directory containing the CS3000 software.
Error. Check printer.
An error occurred while trying to use the printer.
Error. Could not create timer. Close other applications to free a timer.
Windows has a limited number of timers. The CS3000 software requires a timer if it is
connected to a drive. This message is displayed if no timers are available.
File Open Error. Check Disk.
This error can occur if there is a disk problem.
File read error. Check disk.
This error can occur if the CS3000 software could not read a file.
File write error. Check disk.
This error can occur while writing to a file.
Cannot read file. File has been corrupted.
This message indicates that a configuration file has been altered and that the CRC
value stored in the file is no longer valid.
Drive data file format error. Reinstall CS3000.
This message indicates the drive data file format is incorrect or the file has one or
more unknown record types. This indicates that the CS3000 software is incorrectly
installed.
The configuration file drive type is different from the selected drive type.
This error occurs if you attempt to open a configuration file that was created for a drive
type that is not the currently selected drive type.