Rockwell Automation Liqui-Flo Control Configuration Software Version 6.0, M/N 2CS3000 - Manual (Page 75)

Using PC Scope 9-3
Table 9.1 – PC Scope Toolbar Buttons
To: Use this button: Or this menu command:
Clears the trace setup,
display, and data. File | New
Open a saved trace file. File | Open
Save the currently displayed
trace data, set up, and the
snapshots as a trace or ASCII
file. File | Save
Open the Trace Signal Setup
dialog box. Trace | Setup
Zoom the trace display to the
area bounded by the cursors. View | Zoom In
Redisplay the trace in the
normal view. View | Zoom X1
Turn cursors on or off. View | Cursors
Turn cursor tracking on or off. Cursor | Track
Access the online help. Help