Rockwell Automation Liqui-Flo Control Configuration Software Version 6.0, M/N 2CS3000 - Manual (Page 32)

3-8 Control and Configuration Software V6.1
Move between parameter values in the editor by:
• clicking the values themselves
• using the scroll bar
• pressing the [Tab], [PgUp], [PgDn], or arrow keys
When you select Assign or double-click on a parameter, a Parameter Assignment
dialog box is displayed. The options in this dialog box depend on the options for the
parameter.I
If the parameter: The dialog box looks like this: Do the following:
can be set to any
value within a range Enter the value in the box or
change the value by using the
scroll bar.
has limited options Click the arrow and select
from the options.
can be set through
the options or by
selecting a value
within a range Click the arrow and select
from the options, or enter the
value in the box.