Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in FactoryTalk View Site Ed User Manual
Page 15
Publication RA-UM001B-EN-P - November 2010
Developing an HMI Application 15
8. Select the revision that corresponds to your Ethernet device and click
OK.
9. Browse to the controller and select it.
10. Click Add.
11. Type a shortcut name (do not use spaces) which corresponds to name
defined in the Data Retrieval Tool.
12. Click Apply.
13. Repeat steps 1–12 for each controller.
TIP
In the following steps you create shortcuts to the HMI tags
in your controllers.
IMPORTANT
The shortcut name must correspond to the defined name
in the Data Retrieval Tool. These defined names can be
found within the file names of the files exported by the
Data Retrieval Tool (for example,
HMITag-[shortcut name].csv). The exported files are in the
Data Retrieval Tool directory.