Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in FactoryTalk View Site Ed - Manual (Page 32)

Publication RA-UM001B-EN-P - November 2010
32 Developing an HMI Application
MotorN Module
To replace placeholders in the module, see Tag Substitution on page 30.
When the project is running, click on the module to open the
03_MotorN_small display. If the motor is in Single start mode, the
03_MotorN_large opens.
The motor symbol turns green to indicate the running state.