Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in FactoryTalk View Site Ed - Manual (Page 16)

Publication RA-UM001B-EN-P - November 2010
16 Developing an HMI Application
Import Templates from the
Library Project In this section, the display templates are loaded into the empty HMI project.
Displays
1. Expand the project until the Graphics folder is expanded.
2. Right-click Display and select Add Component Into Application.
3. Browse to the Library Project and open the Gfx folder.
4. Select all the files in the folder and click Open.
The display templates and sample screens are imported into your
project.
Note: To properly utilize some graphic files migrated from Process
Control group, before adding display graphics Global Object graphics
should be added first. The steps to add Global Object graphics are the
same to adding display graphics. The Global Object graphics are stored
in the GGfx folder.