Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in FactoryTalk View Site Ed - Manual (Page 62)

Publication RA-UM001B-EN-P - November 2010
62 Display Tag Reference
MotorN
In the following table, #1 = [shortcut name]_H123_H456_H78_C,
#2 = H123\H456\H78, and #3 = H123/H456.
52
29
28
26
30
31
27
50
32
51
24 yellow,
54
25 red
5/34/CurrentUserHasCode(C)
Alarm remark: Single Mode ON/OFF
MotorN_small: Display MotorN_large
MotorN_large: Display MotorN_small
Vis: #1.Par.DisableSingle
Vis: 34 and CurrentUser
1
2
Set 3, Ack #3\*/#2\AlmUnAck
35 or 23
22
4/33/CurrentUserHasCode(B)
Vis: #1.Par.DisableLocal
HasCode(C)
/CurrentUserHasCode(B)
Vis: [Shortcut name]
Global HeavyStartup
AND (NOT #1.Par.
HeavyStartupIgn)
AND #1.Aux.Stopped
Vis: 55>0
#1.Sta.IntlkOK/#1.Sta.NbintlOK/
Vis: CurrentUserHasCode(C) Vis: CurrentUserHasCode(B) Vis: CurrentUserHasCode(C)
#1.Sta.IntlkBypActive
Vis.#1.Par.HasIntlObj
#1.Sta.PermOK/#1.Sta.NBPermOK
/#1.Sta.PermBypActive
Vis.#1.Par.HasPermObj
35
Commands Status Status (cont.) Values
1=#1.Cmd.0 20=#1.Sta.RP 28=#1.Sta.TAM 50=#1.Val.RT
2=#1.Cmd.1 21=#1.Sta.RU 29=#1.Sta.RAM 51=#1.Val.DC
3=#1.Cmd.3 22=#1.Sta.RM 30=#1.Sta.SAM 52=#2\Name
4=#1.Cmd.4 23=#1.Sta.WAI 31=#1.Sta.IDS 54=#2\Text
5=#1.Cmd.5 24=#1.Sta.W 32=#1.Sta.IDP 55=#1.Val.RST_RT
25=#1.Sta.F 33=#1.Sta.REU
26=#1.Sta.UAM 34=#1.Sta.REG
27=#1.Sta.KAM 35=#1.Sta.STU