Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in FactoryTalk View Site Ed - Manual (Page 35)

Publication RA-UM001B-EN-P - November 2010
Developing an HMI Application 35
Valve1, Valve2, Valve3 Module
To use Valve 2 or Valve 3, choose the appropriate module.
To replace placeholders in the module, see Tag Substitution on page 30.
When the project is running, click on the module to open the 03_Valve1_small
display. If the motor is in Single start mode, the 03_Valve1_large display
opens. If needed, you can replace the symbol assigned to the group.
AnaInp or AnaInpC Module
To replace placeholders in the module, see Tag Substitution on page 30.
When the project is running, click on the module to open the
05_AnaInp_small or 05_AnaInpC-small display.