Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in FactoryTalk View Site Ed - Manual (Page 34)

Publication RA-UM001B-EN-P - November 2010
34 Developing an HMI Application
MotorD Module
To replace placeholders in the module, see Tag Substitution on page 30.
When the project is running, click on the module to open the
03_MotorD_small display. If the motor is in Single start mode, the
03_MotorD_large display opens. If necessary, you can replace the symbol
assigned to the group.
SubSys Module
To replace placeholders in the module, see Tag Substitution on page 30.
When the project is running, click on the module to open the
03_SubSys_small display. If the motor is in Single start mode, the
03_SubSys_large display opens. If necessary, you can replace the symbol
assigned to the group.