Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in FactoryTalk View Site Ed - Manual (Page 66)

Publication RA-UM001B-EN-P - November 2010
66 Display Tag Reference
MotorR_E3
In the following table, #1 = [shortcut name]_H123_H456_H78_C,
#2 = H123\H456\H78, #3 = [shortcut name]_H123_H456_H78_e3, and #4
= H123\H456.
53
29
28
26
30
27
50
32
51
24 yellow,
55 25 red
5/34 /CurrentUserHasCode(C)
Alarm remark: Single Mode ON/OFF
MotorR_E3_small: Display MotoR_E3_large
MotoR_E3_large: Display MotorR_E3_small
Vis: #1.Par.DisableSingle
Vis: 34 and CurrentUserHasCode(C)
7
6
Set 3,
35
35 or 23
52
57
56
1 58
20
21 or 22
20
0 = gray
1 = green 21
0 = gray
1 = green
81 80
83
82
4/33/CurrentUserHasCode(B)
Vis: #1.Par.DisableLocal
Ack #4\* /#2\AlmUnAckd
Vis: [Shortcut name]
Global.HeavyStartup
AND (NOT #1.Par.HeavyStartupIgn)
AND #1.Aux.Stopped
31
Vis: 59>0
59
/CurrentUserHasCode(B)
Vis: CurrentUserHasCode(C)
Vis: CurrentUserHasCode(B)
Vis: CurrentUserHasCode(C)
#1.Sta.IntlkOK/#1.Sta.NBIntlkOK/
#1.Sta.IntlkbypActive
Vis:#1.Par.HasIntlkObj
#1.Sta.PermOK/#1.Sta.NBPermOK/
#1.Sta.PermbypActive
Vis:#1.Par.HasPermObj
21
Commands Status Status (cont.) Values E3
1=#1.Cmd.0 20=#1.Sta.RXM 28=#1.Sta.TAM 50=#1.Val.RT 80=#3.DeviceStatus.1
3=#1.Cmd.3 21=#1.Sta.RYM 29=#1.Sta.RAM 51=#1.Val.DCX 81=#3.TripStatus
4=#1.Cmd.4 22=#1.Sta.RM 30=#1.Sta.SAM 52=#1.Val.DCY 82=#3.AverageCurrent
5=#1.Cmd.5 23=#1.Sta.WAI 31=#1.Sta.IDS 53=#2\Name 83=#3.ThermUtilized