Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in FactoryTalk View Site Ed - Manual (Page 63)

Publication RA-UM001B-EN-P - November 2010
Display Tag Reference 63
MotorN_E3
In the following table, #1 = [shortcut name]_H123_H456_H78_C,
#2 = H123\H456\H78, #3 = [shortcut name]_H123_H456_H78_e3,
and #4 = H123/H456.
52
29
28
26
30
31
27
50
32
51
24 yellow,
54
25 red
5/34/CurrentUserHasCode(C)
Alarm remark: Single Mode ON/OFF
MotorN_E3_small: Display
MotorN_E3_large
MotorN_E3_large: Display
Vis: 34 and
1
2
Set 3, Ack #4\*/#2\AlmUnAckd/
35 35 or 23
22
81
80
83
82
4/33/CurrentUserHasCode(B)
Vis: #1.Par.DisableLocal
Vis: {Shortcut
name}Global
HeavyStartup
AND [NOT
#1.Par.HeavyStartupIgn)
AND#1.Aux.Stopped
Vis: CurrentUserhasCode(C)
Vis: CurrentUserhasCode(B)
55
Vis: CurrentUserhasCode(C)
CurrentUserHasCode (C)
CurrentUserHasCode(B)
#1.Sta.IntlkOK/#1.Sta.NBIntlkOK/
#1.Sta.IntlkbypActive
Vis: #1.Par.HasIntlkObj
#1.Sta.PermOK/#1.Sta.NBPermOK/
#1.Sta.PermbypActive
Vis: #1.Par.HasPermObj
Commands Status Status (cont.) Values E3
1=#1.Cmd.0 20=#1.Sta.RP 28=#1.Sta.TAM 50=#1.Val.RT 80=#3.DeviceStatus.1
2=#1.Cmd.1 21=#1.Sta.RU 29=#1.Sta.RAM 51=#1.Val.DC 81=#3.TripStatus
3=#1.Cmd.3 22=#1.Sta.RM 30=#1.Sta.SAM 52=#2\Name 82=#3.AverageCurrent
4=#1.Cmd.4 23=#1.Sta.WAI 31=#1.Sta.IDS 54=#2\Text 83=#3.ThermUtilized
5=#1.Cmd.5 24=#1.Sta.W 32=#1.Sta.IDP 55 = #1.Val.RST_RT