Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 161)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 161
FactoryTalk View ME Configuration
Chapter 5
8. Expand the HMI
Tags folder and
double-click Tags.
The HMI Tags
editor appears in
the workspace.
9. Select each of the
xxxAlarmHandshake, xxxAlarmName, and xxxAlarmTrigger tags associated with each of
the alarm triggers that were deleted in the previous steps.
For example, the circled tags are the three tags you would delete if the E3AlarmTrigger had been deleted
previously.
10. Click to delete the tags.
11. Repeat step 8 … step 10 for all unused alarm tags associated with unused alarm triggers.
12. Click Close to complete tag editing.
TIP Less editing is required when assigning
HMI alarm tags if you name your
controller shortcut [CLX]. Refer to
Chapter 6 for configuring your
controller shortcuts in RSLinx
Enterprise communication setup.
TIP Because you used the pre-configured HMI
file instructions, you can skip Design from
an Existing HMI Application File, and go
directly to
Configure Goto Display Buttons
on Startup Display on page 177 .