Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start User Manual
Page 184
184
Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
Chapter 5
FactoryTalk View ME Configuration
After you have copied all the objects you need for your display, you can delete the Goto display file from
your application.
15.
Right-click the file and choose Delete.
16.
Select all unused Goto display buttons
and delete.
For the CNC Work Cell application
example, Device 5 through Device 10
Goto Display buttons were selected
and deleted.
17.
Select the State Diagram, Alarm History, and Equipment Status Goto display buttons and verify their
display settings or delete them if not required.
System Goto Display
Button
Default Display
Default Parameter
State Diagram
PVPxxx_StateDiagram_Faceplate
StateDiagram_Parameter
Alarm History
PVP1000_AlarmHistory_Faceplate
None required
Equipment Status
PVP1000_EquipmentStatus_Faceplate
EquipmentStatus_Parameter