Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 267)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 267
Logix Communication and Controller Configuration
Appendix D
Assign IP Addresses
The BOOTP/DHCP Server utility is used to assign IP addresses to most devices in this quick start, except the
PanelView Plus terminal. The BOOTP/DHCP utility is installed during the RSLogix 5000 software
installation.
1. From the Start menu, launch the BOOTP/DHCP Server utility.
If you are running this utility for
the first time, the Network Setup
Error dialog box opens.
a. Click OK.
b. Enter the subnet mask from
step 7 on page 261 .
If you are not running this utility
for the first time, from the Tools
menu, choose Request History.
2. Click OK.