Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 95)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 95
GuardLogix Configuration
Chapter 4
FANUC CNC AOP Configuration
To configure the FANUC AOP you update the CNC add-on profiles (AOP), and add and configure the
FANUC CNC.
Update FANUC CNC Add-On Profile (AOP)
Add-on profiles (AOP) are available for download at the RSLogix 5000 Add-On Profiles website:
http://support.rockwellautomation.com/controlflash/LogixProfiler.asp .
1. Log in to the RSLogix 5000 Add-On Profiles website,
http://support.rockwellautomation.com/controlflash/LogixProfiler.asp .
The RSLogix 5000 Add-On
Profiles dialog box opens.
2. Find the FANUC CNC profile.
3. Click the Add-On Profile icon and
follow the download instructions.
4. Extract the AOP zip file and run
setup.
IMPORTANT The FANUC CNC add-on profiles are independent of RSLogix 5000 software releases. Update your CNC add-on profiles to
make sure your application runs correctly.