Save the project file – Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start User Manual
Page 99
Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
99
GuardLogix Configuration
Chapter 4
9.
Click OK to close the New
Module dialog box.
10.
Repeat the previous process
for all other CNC modules
needed for your application.
For the CNC Work Cell application example, two CNC
modules are needed, one for drilling, and one for machining.
The added modules appear in the I/O configuration tree, as
shown here.
Save the Project File
When you have added and configured each of the CNC modules that are to be used in your application, save the
project.
Click
to save your RSLogix 5000 application
file.
IMPORTANT The CNC Work Cell application example includes two
CNC modules and two gantry drives, as shown here.
However, if your application involves additional
devices/modules, such as Kinetix drives, refer to the
Drives and Motion Accelerator Toolkit, publication
.