Add parameter files – Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start User Manual
Page 165
Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
165
FactoryTalk View ME Configuration
Chapter 5
Add Parameter Files
1.
Determine required parameter files for your
application.
Refer to the faceplate displays table on
for the parameter file required for
each faceplate.
2.
Right-click Parameters within the Graphics
folder and choose Add Component Into
Application.
3.
Navigate to the HMI Modules folder within
the toolkit’s files folder.
The file path is C:\Program Files\
RA_Simplification\CMAT\A-Files\
5-HMI\ME\HMI Modules\01_Machine.
4.
Select the folder representing the type of the
first parameter you want to add.
For this example, the 01_Machine folder
was selected for the Startup_Parameter
supporting the
PVP1000_Startup_Faceplate.
5.
Select the parameter file you desire to add.
For this example, Startup_Parameter.par was
selected to support the
PVP1000_Startup_Faceplate added earlier.
6.
Click Open.