Chapter 2, Get started, Chapter – Rockwell Automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual User Manual
Page 15
Advertising
Rockwell Automation Publication ENET-UM003B-EN-P - August 2013
15
Chapter
2
Get Started
This chapter describes the initial configuration settings required for the module.
After setting up the module, see the next chapters for security configuration
examples.
For information on installing the module, see EtherNet/IP Network Modules
Installation Instructions, publication
.
Add the module to a controller project the same as you add a 1756-EN2T
module. All security-related configuration is via the module web pages.
Topic
Page
IMPORTANT
When you finish using the web pages, close the web browser. This prevents any
user on a shared computer from accessing the web pages.
Advertising