Rockwell Automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual - Manual (Page 36)

36 Rockwell Automation Publication ENET-UM003B-EN-P - September 2013
Chapter 3 Configure a Secure Connection to a Microsoft Windows Client
7. Enter the physical IP address of the 1756-EN2TSC module and a name
for the connection.
8. Select Don’t connect now; just set it up so I can connect later and click
Next.
9. Enter the appropriate user name and password.
The user name and password must have already been configured as an
L2TP user on the 1756-EN2TSC module. See the L2TP Edit Users tab as
part of configuring the 1756-EN2TSC module (page
33 ).
10. Check Remember this password.
11. Click Create.